02 Products
Cut-to-size stone
Slab, tile and strip pieces cut to your drawings.
- Travertine
- Available
- Tuff
- On request
- Basalt
- On request
01 Overview
About this format
Cut-to-size stone is made to your drawings: flat pieces cut to the dimensions of a specific project. It suits floors, walls, facades, thresholds and stair treads where a standard modular size does not fit. Travertine is a standard format; tuff and basalt are quoted on request.
Where tiles come in modular sizes, cut-to-size pieces follow a project schedule. Each piece has its own mark, dimensions, thickness and finish. Typical uses are floors with a defined set-out, wall and facade panels, thresholds and stair treads. Profiled and carved pieces are a separate format; see architectural elements.
In general, pieces are laid out on slabs from the schedule, cut to size and then finished. Ask for the pieces for one area to come from the same lot, so that tone and pattern stay consistent across the area.
Send a drawing or a cutting list with piece marks, quantities, dimensions, thickness, edges and finish. Mark the critical dimensions, state the tolerance you need and agree it in writing. Add spare pieces for breakage and site changes, and say if pieces must be numbered for the laying sequence.
02 Availability
Stones for this format
Request a quote for any stone confirmed below. Anything marked “Ask us” is not confirmed yet.
- 01
Travertine
Own quarry at the Ararat deposit, Armenia
Available - 02
Tuff
Supplied through partner quarries in Armenia
On request - 03
Basalt
Supplied through partner quarries in Armenia
On request
03 Finishes
Available finishes
Finishes we have confirmed for the stones named under each one. Approve the sheen or the texture on a sample before you order.
Tuff and Basalt: finishes are confirmed per enquiry.
Not every finish suits every use. For stairs and exterior paving, check slip resistance against test data.
04 Specification
What to specify
Put these points in your request to save a round of questions.
- 01 Drawing or cutting list in PDF, DWG, DXF or XLSX
- 02 Piece marks and quantity for each mark
- 03 Dimensions and thickness of each piece
- 04 Critical dimensions and the tolerance you require
- 05 Stone, tone, cut and pore treatment (travertine)
- 06 Finish and edge profile for each piece
- 07 Marking or numbering for the laying sequence
- 08 Spare pieces, and quantity in m² or by piece
- 09 Packing, destination and preferred delivery basis
05 Applications
Where it is used
Applications in which this format is usually specified.
- 01 Facades Cladding, window surrounds and cornices for building exteriors.
- 02 Interior flooring Tiles, slabs and French pattern sets for interior floors.
- 03 Wall cladding Tiles, strips, split-face panels and slabs for interior and exterior walls.
- 04 Stairs Treads, risers, landings and balusters cut to stair drawings.
- 05 Architectural details Cornices, mouldings, window surrounds, columns, capitals and carved panels.
- 06 Urban infrastructure Plazas, street paving and public steps in hard-wearing stone.
06 Photographs
In the photographs
Pictures from the PetroStone library. Each caption names the stone shown.
Request for quotation
Tell us what you need.
Stone. Dimensions. Quantity. Destination.
Format: Cut-to-size
Quote by stone
Or write to sales@petro-stone.am